Pill tablet press features and installation

The main component of the tablet press is a gantry-type fuselage that is welded to carbon steel. The main shaft is connected to the eccentric and the filling cam. The right end of the shaft is equipped with a rocker arm and handle. The drive shaft drives the eccentric, fills the cam, lifts the rod and the feeder, and the small lever drives the feeder to perform different lifting movements.

The main working process of the tablet press is divided into: A, filling, B, stamping, C and film. These three procedures are performed continuously, and each procedure can be adjusted to accommodate the formation of various tablets.

The tablet tableting machine has the advantages of small volume, light weight, beautiful appearance, compact structure, simple operation, wide application range, and no need for electricity for carrying. Manually shake by changing the mold of different specifications. sheet.

　　Pill tablet press features:

　　1) Lightweight and beautiful, compact, stainless steel, easy to clean.

　　2), humanized design, easy to operate, labor-saving, more suitable for laboratory use.

　　3), small footprint, bottom of the caster, easy to move; only 220V voltage, in line with the distribution of most laboratories.

　　4), the tablet molding speed is fast, the output is high, and continuous production can be realized, which can reach 65 pieces/min, which satisfies most of the demand.

　　5), a wide range of applications, can be customized according to customer needs in various forms of mold, can be pressed round, square and other shaped parts; ordinary wafer diameter up to 18mm; filling depth up to 17mm.

　　6), adjustable, can adjust the weight, thickness, hardness and other indicators of the tablet to meet a variety of different tableting requirements. Can make up to 3 grams of material! Especially suitable for laboratory customers.

　　Tablet press installation and wiring:

　　1. The tablet press is mounted on a solid wooden workbench (also mounted on a concrete platform) with three M12 set screws. The ground working surface is approximately 600 mm (manually operated, easy to operate).

　　For ease of disassembly and repair, there should be a hole on the wooden table with a diameter of approximately 35 mm, corresponding to the position of the lower punch.

　　2. Connect the motor to the ground wire before turning on the motor to ensure safety.

　　Then remove the V-belt, turn on the motor power, start the motor, and see if the motor rotates correctly (the direction of rotation of the motor shaft should be the same as the direction of the arrow on the large pulley)). If the direction of rotation is wrong, connect the cables separately and place a triangle. The belt is already installed.

　　The tablet press is suitable for pressing multi-step products. It has a multi-mode machine, high pressure, high precision, stable plate, reliable performance, time saving and high productivity. Tablet tablet presses are widely used in pharmaceutical plants, pharmaceutical plants, bioengineering, food plants, health products factories, chemical plants, pesticide plants, veterinary drugs and so on. The machine has strong adaptability and strong adaptability to non-stick powder.