Chinese Herbal Tablet Press

Failure repair of the Chinese Herbal Tablet Press

The Chinese Herbal Tablet Press must check the die quality frequently during the working process. If it is found that there are missing edges, cracks, and serious damage, it will be replaced in time to avoid damage to the machine and affect the quality of the tablet.

After using the Chinese Herbal Tablet Press every day, remove the remaining particles and wipe off all parts of the machine. If the deactivation time is long, the die must be removed and the machine rubbed each side. Wipe the work surface, apply anti-rust oil, cover the dust-proof clothes; the die should be wiped clean and immersed in oil to save.

Check the Chinese Herbal Tablet Press regularly twice a month. Make sure that the tablet press is not damaged. Check whether the movable parts such as the worm gear, the worm, the bearing, the pressure wheel, the crankshaft, the upper and lower rail guides are flexible and wearable, and the defects should be repaired and used in time.

The maintenance of the electrical components of the Chinese Herbal Tablet Press should be performed by professional technicians, especially the inverter should be carefully handled. Under normal circumstances, it should be sent to professional manufacturers for maintenance.

Chinese Herbal Tablet Press Technique Parameter

The feeding device of the Chinese Herbal Tablet Press is composed of a hopper, an adjusting screw, a feeder and the like. The feeder is a moon-shaped grid feeder that is mounted on a turntable. The gap between the feeder and the turntable face and the height of the hopper are adjusted according to the fluidity of the particles.

The transmission of the Chinese Herbal Tablet Press is composed of an electric motor, a synchronous pulley and a worm gear reduction box, a test wheel and the like. The motor is mounted on the motor base of the master plate. After the motor is started, the power is transmitted to the reduction worm gear pair through a pair of timing belts. The electric speed is adjusted by AC variable frequency stepless speed regulation. Open the sides or the back door to directly observe and touch the parts.

The housing of the Chinese Herbal Tablet Press is fully enclosed and meets GMP requirements. The upper part has four windows surrounding the city for easy cleaning and maintenance. The lower part is closed with a stainless steel door, which is normally closed and closed only when the dies are repaired and installed. A console is installed on the front of the machine. The tableting chamber and the machine drive section are separated by a stainless steel enclosure to ensure that the tableting chamber is clean and protects the drive components from powder contamination and corrosion.